STANDARD OPEN

SINGLE DRUM UNIT

(Fully Enclosed Guards)

The skid is an all steel construction, built to our standard open skid design with single drum operations.  This unit will have fully enclosed guards, which hinge open when needed and extended drip pan for measuring head.  All steel will be fully seal welded, sandblasted, zinc dimetcoated, primed, and painted to customer's color.

The drums are built as follows:

       092 or .108 x 25,000 ft. capacity with 8" standard

        core (wire not included)

       .108 or .125 x 30,000 ft. capacity with 16" core

            (wire not included)

       3/16" x 25,000 ft. capacity with 10" standard core

            (wire not included)

Other components used in this Single Drum are:

         -  Funk 4 speed transmission

         -  Vickers hydraulic motor

         -  Vickers relief valve

         -  Double "A" by-pass valve

         -  Hydraulic gauge

         -  Barksdale control valve

         -  Double 60 sprockets and roller chain

         -  Heavy-duty drive shaft assembly

         -  Safety glass windshield

         -  Dual entrance door with windows

         -  Full rear bench seat with removable cushioned seat

         -  Standard Veedor Root counter

         -  16" Measuring Head set up for wire over the top     

              operation.

         -  Forklift pockets

STANDARD OPEN

SINGLE DRUM UNIT

(Fully Open Unit)

The skid is an all steel construction, built to our standard open skid design with single drum operations.  This unit will have dual side drum guards, which hinge open when needed and extended drip pan for measuring head.  All steel will be fully seal welded, sandblasted, zinc dimetcoated, primed, and painted to customer's color.

The drums are built as follows:

        092 or .108 x 25,000 ft. capacity with 8" standard

        core (wire not included)

       .108 or .125 x 30,000 ft. capacity with 16" core

            (wire not included)

       3/16" x 25,000 ft. capacity with 10" standard core

            (wire not included)

Other components used in this Single Drum are:

         -  Funk 4 speed transmission

         -  Vickers hydraulic motor

         -  Vickers relief valve

         -  Double "A" by-pass valve

         -  Hydraulic gauge

         -  Barksdale control valve

         -  Double 60 sprockets and roller chain

         -  Heavy-duty drive shaft assembly

         -  Safety glass windshield

         -  Dual entrance door with windows

         -  Full rear bench seat with removable cushioned seat

         -  Standard Veedor Root counter

         -  16" Measuring Head set up for wire over the top     

              operation.

         -  Forklift pockets

SELF-CONTAINED

OPEN SINGLE DRUM UNIT

The skid is an all steel construction, built to our self-contained skid design with single drum operations, and choice of engine selection.  This unit will have dual side drum guards, which are removable when needed and extended drip pan for measuring head.  All steel will be fully seal welded, sandblasted, zinc dimetcoated, primed, and painted to customer's color.

The drums are built as follows:

        092 or .108 x 25,000 ft. capacity with 8" standard

        core (wire not included)

       .108 or .125 x 30,000 ft. capacity with 16" core

            (wire not included)

       3/16" x 25,000 ft. capacity with 10" standard core

            (wire not included)

Other components used in this Single Drum are:

         -  Funk 4 speed transmission

         -  Vickers hydraulic motor

         -  Vickers relief valve

         -  Double "A" by-pass valve

         -  Hydraulic gauge

         -  Barksdale control valve

         -  Double 60 sprockets and roller chain

         -  Heavy-duty drive shaft assembly

         -  Safety glass windshield

         -  Dual entrance door with windows

         -  Full rear bench seat with removable cushioned seat

         -  Standard Veedor Root counter

         -  16" Measuring Head set up for wire over the top     

              operation.

         -  Forklift pockets

ELECTRIC

SINGLE DRUM UNIT

The skid is an all steel construction, built to our self-contained, electric powered, open skid design with single drum operations.  This unit will have single side drum guard, which hinges open when needed and extended drip pan for measuring head.  All steel will be fully seal welded, sandblasted, zinc dimetcoated, primed, and painted to customer's color.

The drums are built as follows:

        092 or .108 x 25,000 ft. capacity with 8" standard

        core (wire not included)

       .108 or .125 x 30,000 ft. capacity with 16" core

            (wire not included)

       3/16" x 25,000 ft. capacity with 10" standard core

            (wire not included)

Other components used in this Single Drum are:

         -  Funk 4 speed transmission

         -  Vickers hydraulic motor

         -  Vickers relief valve

         -  Double "A" by-pass valve

         -  Hydraulic gauge

         -  Barksdale control valve

         -  Double 60 sprockets and roller chain

         -  Heavy-duty drive shaft assembly

         -  Safety glass windshield

         -  Dual entrance door with windows

         -  Full rear bench seat with removable cushioned seat

         -  Standard Veedor Root counter

         -  16" Measuring Head set up for wire over the top     

              operation.

         -  Forklift pockets

CONTAINERIZED

 SINGLE DRUM UNIT

The skid is an all steel construction, built to our containerized skid design with single drum operations.  This unit will have removable access doors, which also hinge open when needed and extended drip pan for measuring head.  All steel will be fully seal welded, sandblasted, zinc dimetcoated, primed, and painted to customer's color.

The drums are built as follows:

        092 or .108 x 25,000 ft. capacity with 8" standard

        core (wire not included)

       .108 or .125 x 30,000 ft. capacity with 16" core

            (wire not included)

       3/16" x 25,000 ft. capacity with 10" standard core

            (wire not included)

Other components used in this Single Drum are:

         -  Funk 4 speed transmission

         -  Vickers hydraulic motor

         -  Vickers relief valve

         -  Double "A" by-pass valve

         -  Hydraulic gauge

         -  Barksdale control valve

         -  Double 60 sprockets and roller chain

         -  Heavy-duty drive shaft assembly

         -  Safety glass windshield

         -  Dual entrance door with windows

         -  Full rear bench seat with removable cushioned seat

         -  Standard Veedor Root counter

         -  16" Measuring Head set up for wire over the top     

              operation.

         -  Forklift pockets

STANDARD CAB

SINGLE DRUM UNIT

The skid is an all steel construction, built to our standard cab skid design with single drum operations.  This unit will have dual side drum guards, which hinge open when needed and extended drip pan for measuring head.  All steel will be fully seal welded, sandblasted, zinc dimetcoated, primed, and painted to customer's color.

The drum options are as follows:

        .092 or .108 x 25,000 ft. capacity with 8" standard

        core (wire not included)

       .108 or .125 x 30,000 ft. capacity with 16" core

            (wire not included)

       3/16" x 25,000 ft. capacity with 10" standard core

            (wire not included)

Other components used in this Single Drum are:

         -  Funk 4 speed transmission

         -  Vickers hydraulic motor

         -  Vickers relief valve

         -  Double "A" by-pass valve

         -  Hydraulic gauge

         -  Barksdale control valve

         -  Double 60 sprockets and roller chain

         -  Heavy-duty drive shaft assembly

         -  Safety glass windshield

         -  Dual entrance door with windows

         -  Full rear bench seat with removable cushioned seat

         -  Standard Veedor Root counter

         -  16" Measuring Head set up for wire over the top     

              operation.

         -  Forklift pockets

EXTENDED CAB

SINGLE DRUM UNIT

The skid is an all steel construction, built to our extended cab skid design with single drum operations.  This unit will have dual side drum guards, which hinge open when needed and extended drip pan for measuring head.  All steel will be fully seal welded, sandblasted, zinc dimetcoated, primed, and painted to customer's color.

The drums are built as follows:

        092 or .108 x 25,000 ft. capacity with 8" standard

        core (wire not included)

       .108 or .125 x 30,000 ft. capacity with 16" core

            (wire not included)

       3/16" x 25,000 ft. capacity with 10" standard core

            (wire not included)

Other components used in this Single Drum are:

         -  Funk 4 speed transmission

         -  Vickers hydraulic motor

         -  Vickers relief valve

         -  Double "A" by-pass valve

         -  Hydraulic gauge

         -  Barksdale control valve

         -  Double 60 sprockets and roller chain

         -  Heavy-duty drive shaft assembly

         -  Safety glass windshield

         -  Dual entrance door with windows

         -  Full rear bench seat with removable cushioned seat

         -  Standard Veedor Root counter

         -  16" Measuring Head set up for wire over the top     

              operation.

         -  Forklift pockets